10 Inspiring Aston Martin Speed Champions LEGO MOCs: Instructions, Tips and Ideas
Aston Martin Speed Champions – LEGO MOCs Inspiration Guide
Aston Martin is one of those badges that instantly brings a feeling of understated power: long hoods, muscular haunches, and that signature grille that looks as refined in silver as it does in British racing green. Translating those lines into Speed Champions scale is a deeply satisfying challenge. The low, shark-nose fronts demand elegant SNOT solutions; the sleek bodies ask for smart color blocking; and the diffusers, wings, and splitters reward clever part usage to hint at complexity without overloading the silhouette. Whether you’re after track-only beasts like the Valkyrie and Vulcan or suave grand tourers like the DBS and Vantage, Aston Martin gives you a full palette of shapes and moods to explore.
In this guide you’ll find a curated set of Aston Martin Speed Champions–style MOCs from talented designers. Use them as display gems, as a parts-technique library, or as a starting point for your own mash-ups. Notice how different builders solve the same problems: rounding the grille with wedge tiles, carving side intakes using bracket stacks, or sneaking in a ½-plate ride height change with inverted tiles. Try multiple liveries—Aston Martins look fantastic in metallics, greys, and of course dark green—but don’t sleep on bold accents (lime, orange, red) for race variants. Most of all, lean into proportions: keep the canopy low, the rear wide, and the stance purposeful. Below you’ll also find build tips and idea prompts to spark new creations—and then a visual list of MOCs (with images, credits, and instruction links) you can dive into today.
Build tips (Speed Champions scale)
-
Start with stance: lock wheelbase (usually 12–14 studs) and track width first; test with arches and tires before you detail.
-
Grille & nose shaping: combine 1×2 rounded plates, 2×2 curved slopes, and 1×1 quarters for that Aston mouth. SNOT a tile stack for the center divider.
-
Side intakes: brackets + 1×2 grille tiles + wedge plates create clean, recessed vents without bulk.
-
Thin splitters & wings: use 1×2/1×3 tiles on hinges or minifig skates/bars for razor-thin aero.
-
Headlight suggestions: trans-clear cheese/wedges into SNOT cavities; print/stickers optional—try tiled “implied” lights first.
-
Color blocking: dark green, sand green, light bluish gray, and black feel authentic; add lime or gold highlights for GT3/F1 vibes.
-
Cabin realism: two-plate floor drop with inverted tiles keeps rooflines low while fitting a wheel and simple dash.
-
Rear drama: hint at LED light blades with bars/clip-plates; layer slopes to suggest diffusers.
-
Keep it sturdy: pin major SNOT modules into a studded core; reinforce the roof with an internal plate spine.
Ideas for types of Aston Martin MOCs
-
Hypercars & track toys: Valkyrie, Vulcan—big aero, dramatic proportions.
-
GT racers: Vantage GT3, GTE liveries, endurance pit-lane setups.
-
Road icons & grand tourers: V8, DBS, DB11/12—sleek, elegant, daily-driveable looks.
-
Movie specials: 007 editions (Vanquish/DBS) with gadgets or alternate colorways.
-
Team displays: pair F1-edition Vantage safety car with a garage vignette, tools, and pit board.
-
Heritage lineup: show evolution—early V8 → Vantage → DBS → modern Valkyrie.
Featured Aston Martin Speed Champions MOCs
Aston Martin Vulcan
by Sweeng.
Get the instructions – Model: Aston Martin Vulcan | Designer: Sweeng.
007 Aston Martin Vanquish – 8-stud wide
by jameshigson0512.
Get the instructions – Model: 007 Aston Martin Vanquish – 8 stud wide | Designer: jameshigson0512.
Aston Martin Vulcan (8-wide Speed Champions)
by beardLB. 
Get the instructions – Model: Aston Martin Vulcan 8-wide Speed Champions | Designer: beardLB.
Aston Martin V8 Vantage
by barneius.
Get the instructions – Model: Aston Martin V8 Vantage | Designer: barneius.
Aston Martin V8
by RubenSicco. 
Get the instructions – Model: Aston Martin V8 | Designer: RubenSicco.
Aston Martin Vantage GT3
by TheBoostedBrick. 
Get the instructions – Model: Aston Martin Vantage GT3 | Designer: TheBoostedBrick.
Aston Martin Vantage F1 Edition
by mp_mocs. 
Get the instructions – Model: Aston Martin Vantage F1 Edition | Designer: mp_mocs.
Aston Martin DBS Superleggera
by Bubak153. 
Get the instructions – Model: Aston Martin DBS Superleggera | Designer: Bubak153.
Aston Martin DBS
by LegoCarMafia. 
Get the instructions – Model: Aston Martin DBS | Designer: LegoCarMafia.
Aston Martin Valkyrie
by Haydeez. 
Get the instructions – Model: Aston Martin Valkyrie | Designer: Haydeez..
